_GoldVignette%20TRANS.png)
Welcome to our online store. You can browse our range and make purchases online, or you can call us with your order.
When ordering larger or pre-owned items, at the checkout your cart will be sent to us to work out a freight price, or you can arrange to pick up at Kingsthorpe (only 10 mins West of Toowoomba) .
When ordering new spare parts, you have the option of us shipping them to you for a fee, or picking up from our Kingsthorpe store.
All prices include GST.
Please call James on 0401 709 850 if you need any assistance with ordering from our online store.
We are also agents for Agpoint (Tillage parts), Parts Express (Tractor, header and skid steer parts), Guld Western (Oils and lubricants) and ASP (slasher/rotary hoe/power harrow blades). Click on the links below to look over catalouges/products. If you would like to purchase these, we can get prices for you.
Kanga farm equipment S Range Rotary Cutters are general-purpose implements designed and engineered to thrive in harsh Australian conditions.
Our S Range Rotary Cutters boast a rugged 3mm deck, fully reinforced underneath, ensuring exceptional strength and longevity. This robust construction enhances durability and creates a clean-top design that minimises debris and water collection; keeping your implement in prime condition even in the harshest environments.
The lowered high-tensile cutter bar allows a higher volume of material to discharge efficiently, producing fast, clean and dependable cutting in light scrub, regrowth and long grass.
Features
Construction
3mm, round-back, clean-top deck
- Round-back increases maneuverability
- Clean top reduces the collection of debris and water
Deck side walls are welded and braced for strength when turning
Gearbox mounting plate is welded to the subframe, creating greater structural integrity, in the event of load torque caused by blade impact
Deck is hot-dip galvanized, for superior corrosion resistance and longevity
Cutter Bar and Blades
Cutter bar
- Lowered, bolt-together, sandwich design
- 100mm wide, high-tensile steel
- Powered by T piece with drive lugs
Blades
Countersunk blade bolt design avoids wear and tear. Unfasten the lock nut to replace blades throughout the lifetime of the implement
Two (2) stepped, suction, spring steel blades pivoting on hardened bushes
Blade bolt inspection cap allows operator to check blades and blade bolts from the top of the implement
Skids and Cutting height
Skids
- Reversible, removable side skids with tapered leading and trailing edges
- Braced for strength
- Positive-locking with individual bolt holes to maintain height
- Adjustable, four (4) positions in 30mm increments
Cutting height
50, 80, 110 and 140mm cutting heights
3 point linkage information
Category 1 and 2 linkage
Two-plate, double clevis mount designed to absorb lateral load and decrease metal fatigue when turning
Multi-position sliding tower
- In the centre-mounted position the implement is directly behind the tractor
- In the offset position, the implement extends out left or right
- Tower chain mounting points are welded to the deck and subframe
- Chain stays allow for tower movement, forward and aft, to maintain an even cut over undulating ground
PTO & Protection
PTO
Series 4 with 150mm (6″) friction clutch
Lever release PTO Shaft Guards facilitate safe engagement of yokes and easy joint maintenance
Protection
Front and rear chain curtain is incorporated into the deck for maximum safety, with a wire rope replacement system for easy replacement
Blade exclusion zone for safety to prevent accidental contact with blades
Waterproof manual holder
Specifications
Code
KSSR120
KSSR135
KSSR150
Size reference
1.2m | 4’0” | 48”
1.35m | 4’6” | 54”
1.5m | 5’0” | 60”
Tractor range (hp)
28-40 | 23-33 @ PTO
35-50 | 25-42 @ PTO
40-50 | 33-42 @ PTO
Gearbox
40hp, 540rpm, 1:1.93 ratio
40hp, 540rpm, 1:1.93 ratio
40hp, 540rpm, 1:1.93 ratio
Blade tip speed (ft/min)
13,119
14,760
16,400
Overall width (mm)
1410
1560
1710
Cutting width (mm)
1200
1350
1500
Weight (kg)
250
280
300
|
Code
|
KSSR120
|
KSSR135
|
KSSR150
|
|---|---|---|---|
| Size reference | 1.2m | 4’0” | 48” | 1.35m | 4’6” | 54” | 1.5m | 5’0” | 60” |
| Tractor range (hp) | 28-40 | 23-33 @ PTO | 35-50 | 25-42 @ PTO | 40-50 | 33-42 @ PTO |
| Gearbox | 40hp, 540rpm, 1:1.93 ratio | 40hp, 540rpm, 1:1.93 ratio | 40hp, 540rpm, 1:1.93 ratio |
| Blade tip speed (ft/min) | 13,119 | 14,760 | 16,400 |
| Overall width (mm) | 1410 | 1560 | 1710 |
| Cutting width (mm) | 1200 | 1350 | 1500 |
| Weight (kg) | 250 | 280 | 300 |
Delivery can be arranged Australia-wide for a fee
Finance available CLICK HERE